 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Features Popular 10 mm package. View angle:25 . High light flux output Soldering methods: Dip soldering. Optical efficiency: 42 lm/W Thermal resistance (junction to leadframe): 13K/W The product itself will remain within RoHS compliant version. ESD-withstand voltage: up to 4KV Descriptions The series is specially designed for applications requiring higher brightness. The LED lamps are available with different colors, intensities, epoxy colors, etc. Applications Flashlight Sunshine light. Advertising Signs. Back lighting. Device Selection Guide LED Part No. Chip Material Emitted Color Brilliant Red Lens Color Water Clear EHP-5393/SUR01-P01 AlGaInP Everlight Electronics Co., Ltd. Device Number : DLE-539-002 http\\:www.everlight.com Prepared date:12-25-2007 Rev: 2 Page: 1 of 8 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Package Dimensions Notes: Other dimensions are in millimeters, tolerance is 0.25mm except being specified. Protruded resin under flange is 1.5mm Max LED. Bare copper alloy is exposed at tie-bar portion after cutting. Everlight Electronics Co., Ltd. Device Number : DLE-539-002 http\\:www.everlight.com Prepared date:12-25-2007 Rev: 2 Page: 2 of 8 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Absolute Maximum Rating (Ta=25 Parameter Forward Current Thermal resistance (junction to leadframe) Operating Temperature Storage Temperature Electrostatic Discharge Soldering Temperature Power Dissipation Reverse Voltage Zener Reverse Current Notes: Soldering time 5 seconds. ) Absolute Maximum Rating 385 13 -40 ~ +85 -40 ~ +100 4K 260 1.3 5 100 W V mA Unit mA K/W Symbol IF Rth(j-l) Topr Tstg ESD Tsol Pd VR Iz V Electro-Optical Characteristics (Ta=25 Parameter Total Flux Peak Wavelength Dominant Wavelength Viewing Angle Forward Voltage Reverse Current Zener Reverse Voltage 2 Symbol Flux p ) Typ. 35 632 624 25 2.4 --Max. 45 -628 -3.0 10 -Unit lm nm nm deg V A V VR=5V Iz=5mA IF=350mA Condition Min. 27 -620 -2.0 -5.2 d 1/2 VF IR Vz Everlight Electronics Co., Ltd. Device Number : DLE-539-002 http\\:www.everlight.com Prepared date:12-25-2007 Rev: 2 Page: 3 of 8 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Rank Combination (IF=350mA) Rank Total Flux R1 R2 R3 39~45 Unit:lm 27~33 33~39 *Measurement Uncertainty of Total Flux:!15% Forward Voltage Combination (V at 350mA) Rank Forward Voltage 2 2.0~2.2 3 3/33/5! 4 2.4~2.6 5 2.6~2.8 6 2.8~3.0 Unit:V *Measurement Uncertainty of Forward Voltage:!0.1V Color Combination ( at 350mA) Rank Dominant Wavelength 1 2 Unit:nm 620~624 624~628 *Measurement Uncertainty of Dominant Wavelength 1.0nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. Device Number : DLE-539-002 http\\:www.everlight.com Prepared date:12-25-2007 Rev: 2 Page: 4 of 8 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device Number : DLE-539-002 http\\:www.everlight.com Prepared date:12-25-2007 Rev: 2 Page: 5 of 8 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Packing Quantity Specification 1.100PCS/1Bag 5Bags/1Box 2.10Boxes/1Carton Label Form Specification CPN: Customer's Production Number EVERLIGHT CPN: P/N: RoHS P/N : Production Number QTY: Packing Quantity CAT: Ranks of Total Flux and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference CAT: HUE: REF: LOT No: Lot Number MADE IN TAIWAN: Production Place EHP-5393/SUR01-P01 QTY LOT NO MADE IN TAIWAN Everlight Electronics Co., Ltd. Device Number : DLE-539-002 http\\:www.everlight.com Prepared date:12-25-2007 Rev: 2 Page: 6 of 8 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode "breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can't flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up. Everlight Electronics Co., Ltd. Device Number : DLE-539-002 http\\:www.everlight.com Prepared date:12-25-2007 Rev: 2 Page: 7 of 8 Prepared by: Dantechen Technical Data Sheet High Power Lamp EHP-5393/SUR01-P01 6. If the emitter is operated, consider using metal heat sink with the lowest possible thermal resistance. We do not recommend lighting the emitter for more than a few seconds without an additional heat sink. For the thermal performance using a flat heat sink, allow an exposed surface area of about 25mm2 at least. 7. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance 350 Max.) 3 sec Max. 3mm Min.(From solder joint to case) Max. (30W Preheat temp. Bath temp. Bath time. Distance DIP Soldering 100 Max. (60 sec Max.) 260 Max. 5 sec Max. 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device Number : DLE-539-002 http\\:www.everlight.com Prepared date:12-25-2007 Rev: 2 Page: 8 of 8 Prepared by: Dantechen |
Price & Availability of EHP-5393-SUR01-P01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |